Descargar Imprimir esta página

Bose L1 Pro32 Guia Del Propietario página 10

Ocultar thumbs Ver también para L1 Pro32:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 90
Setup
Channel 3 Controls
Channel 3 is for use with Bluetooth® enabled devices and line-level audio inputs.
Bluetooth Pairing
The following steps describe how to manually connect a Bluetooth enabled device to stream audio.
You can use the Bose Music app to access additional device control. For more information on the Bose Music
app, see Bose Music App Control below.
1.
Turn on the Bluetooth feature on your mobile device.
2. Press and hold the Bluetooth Pair Button for two seconds. When ready to pair, the LED will flash blue.
3. Your L1 Pro will be visible in your device list on your mobile device. Select your L1 Pro from the device list.
When the device pairs successfully, the LED will illuminate solid white.
Note: Some notifications may be audible through the L1 Pro while in use. To prevent this, disable notifications
on your connected device. Enable airplane mode to prevent call/message notifications from interrupting
audio.
TRS Line Input
A mono input. Use a 6.4-millimeter (1/4-inch) TRS cable to connect line-level audio sources, such as mixers or
instrument effects.
Aux Line Input
A stereo input. Use a 3.5-millimeter (1/8-inch) TRS cable to connect a line-level audio source, such as mobile
devices or laptops.
Bose Music App Control
Download the Bose Music app for additional device control and audio streaming. Once downloaded, follow
the instructions in the app to connect your L1 Pro. For specific information on how to use the Bose Music app,
see the in-app help.
Features
Adjust channel volume
Adjust channel mixer parameters
Adjust system EQ
Enable channel mute
10 • English
Enable reverb mute
Enable phantom power
Access to ToneMatch preset library
Save scenes
L1 Pro32 Portable Line Array • Owner's Guide
PRO.BOSE.COM

Publicidad

loading