Bose L1 Pro32 Guia Del Propietario página 23

PRO.BOSE.COM
Problem
Microphone is
encountering feedback
Paired Bluetooth®
device will not connect
to the loudspeaker
Excessive hum when
daisy-chaining multiple
units
Owner's Guide • L1 Pro32 Portable Line Array
What to do
• Turn down channel volume.
• Orient the microphone so that it is not pointing directly at the L1 Pro.
• Try a different microphone.
• Try a different position for the L1 Pro and/or vocalist on stage.
• Increase the distance from the L1 Pro to the microphone.
• If using a vocal effects processor, make sure it is not contributing to the
feedback problem.
• If your paired device requires a passcode, make sure the one you entered is
correct.
• Make sure Bluetooth® functionality is turned on or enabled on your source
device.
• Your Bluetooth device may be out of range; try moving it closer to the L1 Pro.
• If possible, turn off all other nearby Bluetooth devices or disable their
Bluetooth functionality.
• Clear the loudspeaker memory or pair to a new device by pressing and
holding the Bluetooth Pair Button for ten seconds. Delete the L1 Pro from the
Bluetooth device's memory. Pair the Bluetooth device with the L1 Pro again.
• Turn the power off and back on; then try re-pairing your device.
• Ensure the volume on the daisy-chained unit(s) is not set too high.
Care & Maintenance
English • 23