Publicidad
Idiomas disponibles
Idiomas disponibles
7 Mains failure mode (CRETA SILENT ATS):
7.1 Introduction
The ATS (automatic transfer switching) system allows to control the start and stop
functions of the generator, as well as the conversion between the generator output
and the mains output. The signal communication between the ATS and the
generator is performed through a cable of 7 lines. The user can decide if he wants
to work in automatic or manual mode, and also to select between generator output
or mains output.
7.2 The panel components of the ATS box
7.3 Electrical parameters
Power supply: DC10-15V
Input voltage: AC220-240V
Rated frequency: 50-60Hz
Maximum power: 10000W
Maximum intensity: 45A
Connection between ATS box and generator
1. MAINS PILOT
2. GENERATOR PILOT
3. POWER OUTPUT PILOT
4. OK BATTERY PILOT
5. FAILURE PILOT
6. MANUAL/AUTO
7. EMERGENCY BUTTON
64
Publicidad
