Descargar Imprimir esta página

EINHELL GE-CM 36/37 Li Solo Manual De Instrucciones Original página 21

Ocultar thumbs Ver también para GE-CM 36/37 Li Solo:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 124
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Explanation of the symbols used (see Fig. 17)
1. Read the directions for use before operating
the equipment.
2. Keep your distance!
3. Caution: Sharp blades! Pull out the safety
plug before carrying out any repair work or if
the power cable is damaged. The blades will
continue to rotate after the motor is switched
off .
4. Protect the equipment from rain and damp
conditions
5. Guaranteed sound power level
6. Dispose of batteries correctly
7
For use in dry rooms only
8
Safety class II
9
Store the battery only in dry rooms with an
ambient temperature of +10°C to +40°C.
Place only charged batteries in storage (char-
ged at least 40%).
Anl_GE_CM_36_37_Li_SPK9.indb 21
Anl_GE_CM_36_37_Li_SPK9.indb 21
GB
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1
Upper push bar
2
Safety lock-off
3
Switching bar
4
Joint
5
Catch basket
5a Grass catch basket, without carry-handle
5b Grass catch basket, carry-handle
6
Central cutting height adjustment facility
7
Ejector fl ap
8
Carry-handle
9
Cutting tool cover
12 Fill level indicator
16 Quick-tightening screws
17 Safety plug
18 Rechargeable battery
19 Battery charger
2.2 Items supplied and unpacking (Fig. 2)
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
- 21 -
29.10.2018 13:57:04
29.10.2018 13:57:04

Publicidad

loading

Este manual también es adecuado para:

Ge-cm 36/37 li34.131.7034.131.72