Descargar Imprimir esta página

osann Swift360 S Manual Del Usuario página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
EN
Top
tether
76–105 cm
• Remove the top tether from the pocket.
• To release the top tether, press the grey button
with one hand and pull the side of the belt an-
chor to the required length with the other hand.
• To fi x the top tether, clip the anchor to the fi x-
ing point on the car seat and pull it as tight as
possible. The display does not turn green until
the belt is tightened suffi ciently.
• When using the child car seat facing to the rear,
the top tether strap must be threaded through
the top tether guide on the side of the child car
seat. Ideally, use the guide towards the interi-
or of your car to allow rotation towards the car
door for easy entry and exit.
• The top tether strap is only necessary for the
children 76–105 cm in height. For children 100–
150 cm in height, you can stow the top tether
strap back in the storage compartment.
Isofi x connectors
• Press the two lateral Isofi x connector buttons
in order to extend the length of the Isofi x con-
nectors.
• Guide the Isofi x connectors onto the Isofi x
anchor points on the seat of the vehicle and
ensure that they lock into position.
• Push the child car seat in until it rests securely
against the backrest of the seat of the vehicle.
Ensure that both Isofi x indicators are showing
green.
for
height
- 20 -
range

Publicidad

loading