Kodak P460 Guia Del Usuario página 6

35mm Negative filmstrips are unsuitable with any of the following conditions:
S u p p o r t e d M e m o r y C a r d s
 MS (MemoryStick)
MS Pro

 MS Pro Duo (adapter required)
 MS Duo
 MMC (Multi Media Card)
RS-MMC (adapter required)

P l a s t i c S h e a t h s
The plastic sheath is especially useful when scanning your older, fragile photos. The plastic sheath also helps eliminate the
possibility of de-focusing due to the uneven surface of curled photos.
6 Customer Support: http://www.pandigital.net/kodaksupport
All manuals and user guides at all-guides.com
1. Ends of the filmstrip are taped. Remove the tape and clean any residue of glue before scanning.
2. Ends of the filmstrip have not been cut straight across. Cut the ends straight across before scanning.
3. Ends of the filmstrip are folded. Cut the folded portions before scanning.
4. Ends of the filmstrip are tapered. Cut the ends straight across before scanning.
5. Some perforations on the filmstrip are torn or missing. This may affect the scanner's auto feeding
mechanism. Gently push the filmstrip into the 35mm Negative adapter when necessary.
 xD (extreme Digital, H-type and M-type)
SD (Secure Digital)

 SDHC
 MINISD (adapter required)
 MICROSD/T-Flash (adapter required)
MICROSD Card (SD adapter required)

Curled photo
Fuzzy areas that result from the uneven
surface of the curled photo