Removal of the Wire Shelf
To remove the wire rack, pull the wire rack
as shown in the figure. After releasing it
from the clips (a), lift it up.
a
WaterSteam Clean System:
Set your oven function to static function at
90 °C to operate WaterSteam function.
Spill 200-250ml of water to the tray which
is stated on the oven base. Start the oven
and WaterSteam will take approximately
30 - 60 minutes to prepare your oven for
cleaning easily.
5.2 Maintenan Ce
WARNING: The maintenance of this
appliance should be carried out by an
authorised service person or qualified
technician only.
Changing the Oven Lamp
WARNING: Switch off the appliance
and allow it to cool before cleaning
your appliance.
•
Remove the glass lens, then remove the
bulb.
•
Insert the new bulb (resistant to 300 °C)
to replace the bulb that you removed
(230 V, 15-25 Watt, Type E14).
•
Replace the glass lens, and your oven
is ready for use.
•
The product contains a light source of
energy efficiency class G.
•
Light source can not be replaced by end
user. After sales service is needed.
•
The included light source is not intended
for use in other applications.
Replaceable light source by a
professional
The lamp is designed specifically for
use in household cooking appliances.
It is not suitable for household room
illumination.
EN - 17