Effect Adjust; Users Mode Set; Edit Program - Futurelight PHS-575 Manual Del Usuario

Effect Adjust

Test function of each channel
With this function you can test each channel on its (correct) function.
Manual control
With this function, you can adjust each channel manually.
Calibrate Values
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password for
this function is „050".

Users mode set

User mode
With this function, you can create user defined channel orders.
Edit User mode
With this function, you can adjust the Preset user defined channel order.

Edit program

Select program for auto program
With this function, you can select the program for the Program Run.
Edit program
With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal programs.
Rec. Controller
The device features an integrated DMX-recorder by which you can transmit the programmed scenes from
your DMX-controller to the device. Adjust the desired scene numbers by pressing Up or Down (from – to).
When you call up the scenes at your controller, they will automatically be transmitted to the device.
Excursion:
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 different
Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave unit was assigned
to. If e.g. a Slave unit is set to „Slave 1" in the menu „Set to Slave", the Master unit sends „Auto Program
Part 1" to the Slave unit. If set to „Slave 2", the Slave unit receives „Auto Program Part 2".
57/117 00024314.DOC, Version 1.5