Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the fixation-ring with an appropriate tool. Remove the gobo and insert the new gobo. Press the
fixation-ring together and insert it in front of the gobo.
Inserting/Exchanging colour-filtres
If you wish to use other colour-filtres, or if colour-filtres are to be exchanged, please follow the instructions
below:
Procedure:
Step 1:
Turn the colour-wheel until the desired coulour-filter appears. Position the open hole on the
gobo wheel to the color filter need to be replaced.
Step 2:
Press the color filter on the color wheel to lower position with the finger. Hold down and push
out the color filter with the other hand.
Slot-in system for exchanging colour-filters without tools!
Transport securing
The PHS-575 comes with locked transport securings in order to avoid damages.
Please note: All transport securing must be unlocked before operating the device!
Slot-in gobo-system for exchanging gobos without tools!
Inserting/Exchanging gobos as described above.
Install the colour-filtres with the device switched off only.
Unplug from mains before!
Do not operate this device with opened cover!
Inserting/Exchanging colour-filters as described above.
Please note!
DANGER!
Please note!
41/117
00024314.DOC, Version 1.5
Publicidad
Tabla de contenido
