Publicidad
Idiomas disponibles
Idiomas disponibles
3. Ironing
1
Press the steam release button (14) for ironing with
steam.
Important: When placing the iron on the pad, be sure to
first insert the heel in the upper side of the control panel,
as shown in the figure.
Tip: For better ironing results, iron the last strokes without
pressing the steam release button (14) to dry the garment.
"PulseSteam" function
This appliance has a special function for tackling difficult
creases.
1
Press the steam release button (14) two times in
quick succession (double-click). Powerful shots of
steam will be released.
Vertical steam
Can be used to remove creases from hanging clothes,
curtains, etc.
1
Hold the iron in an upright position 15 cm away from
the garment to be steamed.
2
Press the steam release button (14) repeatedly with
pauses of at least 5 seconds.
Warning! : never point the steam jet at garments being
worn, or at people or animals.
4. Energy saving
If the energy saving setting is selected, you can save
energy and water and still achieve good results when
ironing most of your garments.
1
Press the energy saving button "Eco" (4). The indicator
light will come on.
2
To switch back to the normal energy setting, press the
"Eco" button again. It is advisable to use the normal
energy setting to get optimum results on thick and very
wrinkled fabrics.
* Model dependent
2
1
2x
5"
15 cm
BOS CH
17
Publicidad
