Publicidad
Idiomas disponibles
Idiomas disponibles
EN
OPERATION INTRODUCTION
GUEST CALL _ STANDBY MODEY
The guest press
the call button on
outdoor camera 1
A 10s of continuous DingDong tone is heard inside and outside
The guest's image automatically displayed on the screen
NOTE: If both call button on two outdoor camera are pressed at approximate to the same time, the preference
will be given to the outdoor camera which call button was pressed first, unless the call button is pressed again
afer the indoor monitor go into standby mode, please be aware of that there is no indication on second outdoor
camera.
NOTE: The indoor unit will automatically go into standby mode if you are not at home or have not reached the
indoor unit in 60s.
When you press the unlock button, the guest's voice and picture will turn off after 20 seconds; this
custom function allows you to check if the guest is already logged in.
For models with SD card, when recording is on, the entire call will be recorded. If the user presses the
button
For models with SD card, with snapshot image mode, the entire call will be recorded. If the user presses
the button
In the surveillance state, the device listens to the noise of the external device, press the button
to talk and the button
Press the talking
button on indoor
monitor
Stop ringing
Start conversation
with outdoor camera
The maximum duration of a single conversation is 120s.
Press the unlock
button on indoor
monitor
The door lock unlocks.
Press the hang up
button on indoor
monitor
the recording will be stopped manually.
the recording will be stopped manually.
to unlock the lock.
The guest press the
call button on
outdoor camera 2
Publicidad
