Descargar Imprimir esta página

DPLUS HOOP LASE4S Manual De Instrucciones página 25

Publicidad

Idiomas disponibles

Idiomas disponibles

DOOR2 ST TUS : Enable or disable the preview of Door2.
RE ORD MODE: Options include "record" and "snapshot". Recording indicates that the
device with the SD card inserted starts recording automatically when the guest presses
the call button on the outdoor unit. Snapshot means that the device, with inserted SD
card or internal memory, takes a picture of the outdoor video image if a guest presses
the call button on the outdoor unit.
DOOR1 UNLO
TIME: from 02 to 10 seconds max.
DOOR2 UNLO
TIME: from 02 to 10 seconds max.
RETURN: e it the current menu.
4_ SET THE ALARM PARAMETERS
On main menu, move te cursor to the option
"Alarm", then press
SENSOR TYPE: each channel of the camera
corresponds to the I/O status (see explanation
of the status below), this means that when the
alarm is active, it will trigger the corresponding
channel to start recording or take a snapshot.
I/O STATUS TYPE:
NO : normally open, it means that in the normal state, the sensor is kept at a constant low
voltage if the output voltage rises the alarm is activated.
NC : normally closed, normally open, means that in the normal state, the sensor is kept at
a constant low voltage if the output voltage drops the alarm is activated.
DISABLE: Set I/O to closed, if sensor alarms are not in use.
CAM1
:
Enable
CAM2:
Enable
CAM1 RING TIME: alarm ring time for camera 1 if camera 1 was triggered by an activity
detected by the sensors. The values can be set from 0 to 30s maximum.
CAM2 RING TIME: Alarm ring time for camera 1 if camera 2 was triggered by activity
detected by the sensors. The values can be set from 0 to 30s maximum.
ALARM RECORDING: Options include recording and snapshot. Record indicates that when
the alarm is triggered, it will activate the corresponding channel to start recording.
Snapshot means that when the alarm is triggered, it will activate the corresponding
channel
to
RETURN: exit the current menu.
to enter.
or
disable
or
disable
capture
a
the
preview
of
the
preview
of
picture
of
camera
1.
camera
2.
the
video.

Publicidad

loading

Productos relacionados para DPLUS HOOP LASE4S

Este manual también es adecuado para:

Hoop lase7w