EN
MENU OPERATIONS
The button
stand-by mode, press the button once to access the main settings
menu. In the settings menu, turn the button
a sub-menu, then press it again to enter the sub-menu. Inside the sub-
menu, press
adjust the values of each option, press
select "return" option in main menu, press button
menu screen, the monitor will enter stand by mode.
If the user does not perform any operation on the monitor, the internal device will enter
standby mode automatically after 1 minute. In stand-by mode, press the button
to access the main menu screen, as shown below.
Rotate the key
up or down to move the cursor to the return option and then press
to exit.
1_ SET SYSTEM PARAMETERS
Scroll the button
up or down to move the cursor
to "system" option, then press
system
sub-menu
information.
1.1 _ SYSTEM - LANGUAGE
In the system menu, move the cursor to language
and press
to enter the language submenu.
To change device language, press
menu options and roll up or down
values, press again to confirm choice.
is a three-in-one key, but also a composite key: In
to select menu options, rotate it up or down to
to enter. The
includes:
language,
to select
to adjust
to confirm. When you
time,
up or down to select
to exit the