Publicidad
Idiomas disponibles
Idiomas disponibles
6.2_ FILES - SNAPSHOT FILES (optional, for models with SD card)
On "Files" menu scroll the button
or downward to move the cursor to the
option "Snapshot files", press
the "snapshot files list".
or downward to select file to view, a red list
indicates that the list has been selected,
press
to playback. During playback
scroll
upward
switch the current picture to the last file or
the next file, press again
Move the cursor to the option "Return" and
press
to exit the current menu.
EN
ALARM INSTRUCTION
The CAM1 and CAM2 of this product each have an alarm function. When the trigger
GND terminal is shorted, the alarm is triggered, the speaker of the indoor unit sounds
and continues for 120 seconds. During this time, click "hang up" to stop the alarm
and
For models with SD card, it triggers recording or snapshot at the same time
(according to system settings), the recording time is 120 seconds; during this period,
click "hang up" to stop the alarm and enter standby mode.
CONNECTION DIAGRAM
It can be applied to connect 2 normally closed (NC) or normally open (NO) alarm
inputs. 2 alarm input channels per camera without limitation on input type (can be
normally open or normally closed).
The ALM terminal of the alarm detector is connected in parallel with the camera
terminal ALM (the alarm detector needs to be powered by an external power supply).
The ground terminal of the alarm detector is connected in parallel with the GND
terminal of the camera. For NO alarm inputs, when GND and ALM are in connection
state, the alarm is activated. For NC alarm inputs, when GND and ALM are in
disconnect state, the alarm is activated. It applies to any alarm sensor.
AC/DC power adapter for
camera (not included)
upward
to enter
Scroll
upward
or downward, it will
to exit.
enter
standby
mode.
Publicidad
