Zodiac DF2 Serie Manual De Instalación Y De Uso página 28

Time bands parameter:
• If the appliance is within a time band, the parameters that define the fan operation and the pool cover
status will be bypassed by the time band parameter.
• When the appliance exits a time band, the time band parameter no longer applies, thus the fan operation
and the pool cover status will operate as they are defined.
This feature, for instance, is useful when the installation has a no occupancy period or even at night time; defining these
kind of time period as a time band with a parameter equal to 1 or 2 will achieve energy savings without affecting the
comfort of the installation.
To activate and then configure time band feature:
• Enter the Time band section, present in the menu screen 1, (see § 3.3 "Appliance configuration" for reference).
Note that this example is for setting the time band of MONDAY. Once all data has been introduced to this time band, you
can navigate to the rest of the days of the week using the
28
• Press key, the "NO" value will be highlighted.
OK
• Use and keys to set the paramerer to YES or NO.
• Press key to confirm your selection .
OK
• Then press key to move to the time band setting parameter.
• Press key to enter the teime band definition screens.
OK
• Once inside the time band definition section this screen will be shown.
• Press key to edit the parameter associated with this time band.
OK
• Use and keys to set the paramerer.
• Press key to confirm your selection .
OK
• Then press key to move to the time band start time: "B1".
• Press , To edit the time band start time.
OK
• Use the up and down
• Use and keys to navigate through hours, minutes and seconds.
• Press key to confirm your selection.
OK
• Repeat the process for the time band end time: "B2".
and
keys to set the paramerer.
keys