Sony SPP-935 Manual De Instrucciones página 17

Storing phone numbers on the base phone
(REDIAL/PAUSE)
Notes
• In step 3, if you do not enter the phone number, the previously stored number will be
erased.
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• You cannot store phone numbers on the base phone while the handset is
being used. The IN USE lamp will light up to indicate this condition.
Tips
• If you enter a wrong number, press (SPEED DIAL), then start from the
beginning.
• Use the supplied directory to write down what you have stored on the speed dialing
numbers.
To store the previous number dialed
Press (REDIAL/PAUSE) directly after step 2, then go to step 4.
1
Press (PGM).
The SPEAKERPHONE lamp
flashes quickly.
2
Press one of the ten dialing keys
((0) to (9)) for the phone
number to be stored.
You will hear a confirmation
beep.
3
Enter the phone number you
want to store.
You can enter up to 16 digits,
including a tone and a pause,
each of which is counted as one
digit.
4
Press (SPEED DIAL).
You will hear another
confirmation beep, and the
number is stored.
continued
Advanced Features
17
EN