EXHAUST FILTER STYLE EF-9
The exhaust filter must be replaced when
it becomes dirty. The timing between
replacement intervals will depend on the
use conditions the vacuum cleaner is
exposed to. The filter should be checked
when changing the dust bag. The filter
CANNOT be washed as it will lose its
dust trapping ability.
1. Remove filter cover by pressing the
release tab on the cover and rotating out
from vacuum cleaner.
Filter Cover
Hepa Media
Exhaust Filter
3. Place new filter
cartridge into cover as
shown.
HEPA MEDIA EXHAUST FILTER
Filter Cover
Release Tab
2. Remove the
filter cartridge
from cover.
5. Rotate in until
cover snaps into
place.
- 18 -
4. Replace the
filter cover by
placing bottom
tabs in slots.
Tabs
Slots