Kenmore Elite BU1018 Manual De Uso Y Cuidado página 11

When the vacuum cleaner is running with
normal air flow, the light on the CHECK
BAG indicator is off.
NOTE: It is normal for the CHECK BAG
indicator to come on when using certain
attachments, due to reduced airflow
through attachment. No maintenance is
required.
The light comes on when:
• Bag is full. See CHANGING DUST BAG
(page 16).
• The airflow is blocked. Check motor
safety filter and other possible clog
locations shown in REMOVING CLOGS
(pages 19-20).
CAUTION
DO NOT use the hose when the vacuum
cleaner is in the use position.
Always return the vacuum cleaner to the
upright position before using the hose
and attachments.
1. Place the
vacuum cleaner in
the upright lock
position.
2. Remove the
hose from the
hose holder.
CHECK BAG INDICATOR
ATTACHMENTS
Hose
Hose
Holder
- 11 -
3. Use attachments as needed. See
ATTACHMENT USE TABLE (page 12).
FOR ADDITIONAL REACH:
Place the telescoping wand onto the hose.
The crevice tool, combination brush, and Pet
HandiMate ® can be attached to the
telescoping wand as needed.
CAUTION
When using attachments, be careful not
to overextend the stretch hose when
reaching. Trying to reach beyond the
hose stretch capability could cause the
vacuum cleaner to tip over.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose. Property
damage or personal injury could result.
CHECK BAG
Indicator