Starting A Programme With The Delay Start; Interrupting A Programme And Changing The Options; Cancelling A Programme; Opening The Door - Electrolux EWF 1286 GDW Manual De Instrucciones

Ocultar thumbs Ver también para EWF 1286 GDW:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• The indicator
the display.
• The programme starts, the door
locks, the display shows the
indicator
• The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15 minutes
from the start of the
programme:
• The appliance adjusts
automatically the
programme duration agree
with the laundry load.
• The display shows the new
value.
10.8 Starting a programme with
the delay start
1. Press
again and again until the
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
:
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change the
set of the delay start before
you press the
the delay start:
• Press
appliance to pause.
• Press
display shows
• Press
the programme
immediately.
10.9 Interrupting a programme
and changing the options
You can change only some options before
they operate.
1. Press
.
starts to flash on
.
. To cancel
to set the
until the
'.
again to start
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.

10.10 Cancelling a programme

1. Press the button
to cancel the programme and to
deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
drains the water. Make sure
that the detergent is still in the
detergent compartment, if not
fill the detergent again.

10.11 Opening the door

CAUTION!
If the temperature and level of
the water in the drum are too
high and the drum still rotates,
you cannot open the door.
While a programme or the delay start
operates, the appliance door is locked
and the display shows the indicator
Open the appliance door when the
programme or the delay start
operates:
1. Press
to pause the appliance.
2. Wait until the door lock indicator
goes off.
3. Open the door.
4. Close the door and press again
The programme or delay start continues
to operate.
10.12 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display
• The indicator of the
ENGLISH
for some seconds
comes on.
goes off.
15
.
.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido