Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL INSTRUCTIONS.-
Read the instructions in this manual. This gives important
information on the safety, use and maintenance of the
machine.
Follow the following recommendations:
1
Keep children and animals away from the machine. Do
not leave children unsupervised around the equipment.
2
The machine will only be used by 1 person at the same
time.
3
Work at the recommended exercise level, do not get to
exhaustion. If you feel pain or discomfort of any kind, stop
exercising immediately and consult your doctor.
4
Use the appliance on a solid, level surface with 1 meter
around. It is not advisable to keep your unit in wet place
because the oxidation would be inevitable. Do not use the
equipment outdoors.
5
Keep hands and feet away from moving parts.
6
Use suitable clothing and footwear. Tighten the laces
properly.
7
Use the equipment according to the functions described
in the manual, do not use accessories or exercises other
than those described by the manufacturer.
8
Do not place any sharp objects around the machine.
9
Do not allow children or disabled persons use the
appliance without the strict supervision of a qualified
person.
10
Do stretches before using the computer as a warmup.
11
Select an appropriate weight to their physical condition.
12
Do not use the equipment if it is damaged or
incomplete.
13
It is recommended to exercise a monitor to oversee the
exercise.
14
This unit has been designed for semi-professional use.
The maximum user weight is 130 kg.
Caution: Consult your doctor before beginning to use
the machine. This advice is especially important for
those over 35 or suffering from health problems.
Keep these instructions safe for future use.
MAINTENANCE.-
1 Lubricate moving parts regularly. At least once a year.
2 Check that all parts are tight and that the machine is
working properly before first use.
3 Use a damp cloth to clean the equipment. The use of
solvents is not recommended.
ASSEMBLY INSTRUCTIONS.-
Take the unit out of the box and check that you have all
the parts, Fig.A, Fig.B.
For the assembly of this machine, the help of a
second person is recommended.
1.- Position the rear bottom frame (1), the rear frame (3)
and the bottom frame (2) and fix them together using the
screws (34), the washers (24) and the nuts (25), Fig.1. Do
not fully tighten the screws.
English
Position the support (8) and fix it to the lower support (2)
using the screws (33), the washers (24) and the nuts (25),
Fig.1. Do not fully tighten the screws.
2.- Attach the plate (18) to the upper support (17) and to the
rear frame (3) using the screws (33), the washers (24) and
the nuts (25), Fig.2. Do not fully tighten the screws.
Insert the guide bars (12) into the lower support (8). Place
the sliding frame (6) on the guide bars (12) and insert the
guide bars (12) to the upper support (17), Fig.2. Fix the bars
(12) using the screws (30) and the washers (24). Do not fully
tighten the screws.
Remove the screw (B) from the lower support (8). Insert the
right-side bar (10) into the upper support (17), then insert the
bar (10) into the lower support (8), refit the screw (B), push
the bushing (A) up and tighten the bushing screw, Fig.2.
Install the left-side bar (9) in the same way as the right-side
bar (10).
Check the movement of the sliding frame (6).
Fully tighten all screws from the first and second steps.
3.- Attach the support frame (14) and fix it to the sliding
frame (6) using the screws (31), the washers (24) and the
nuts (25), Fig.3.
Attach the backrest (21) to the support (16) using the
screws (26), Fig.3.
Position the support (16) on the U plates (A) of the sliding
frame (6) and fit the screws (32), the washers (24) and the
nuts (25), Fig.3.
Attach the weight support (11) to the frame (14) using the
screw (36) and the washer (23), Fig.3.
4.- Attach the left shoulder pad frame (4) to the sliding
frame (6) using the screws (31), the washers (24) and the
nuts (25), Fig.4.
Assemble the right shoulder pad frame (5) in the same way
as the left frame (4), Fig.4.
Attach the shoulder pads (19) to the left (4) and right (5)
frames using the screws (28) and the washers (23), Fig.4.
Attach the head pad (20) to the sliding frame (6) using the
screws (27) and the washers (23), Fig.4.
5.- Attach the seat (22) to the lower support (8) using the
screws (28), (29) and the washers (23), Fig.5.
Attach the adjustment frame (15) to the lower frame (2)
using the screw (32), the washers (24) and the nut (25),
Fig.5.
Place the support (13) on the U plates (A) of the lower
support (8) and fit the screws (32), the washers (24) and
the nuts (25), Fig.3.
Fix the support (13) to the frame (15) using the screw (32),
the washers (24) and the nut (25), Fig.5.
Place the backrest (7) on the support (13).
(Depending on the desired exercise, this part will be placed
or not.)
Do not hesitate to get touch with the Technical Assistance
Service if you have any queries by phoning customer
services (see last page in manual).
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS PRODUCTS WITHOUT
PRIOR NOTICE.
9
Publicidad
