Sauder Clifford Place Serie Instrucciones De Montaje página 26

Step 22
å
Refer to the enlarged diagram to identify the parts on the
HINGES.
å
The DOORS may need some adjustments. Follow the
text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal), turn the
adjusting screw in or out.
å
To adjust the DOORS up and down (vertical), loosen both
vertical adjustment screws. Move the DOORS up or down
to the desired location. Tighten the screws after making
adjustments.
å
To adjust the DOORS in or out (depth), loosen the mounting
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
Page 26
Mounting screw (depth)
www.sauder.com/service
Adjusting screw (horizontal)
(vertical adjustment)
429508