Sauder Hammond Serie Instrucciones De Montaje página 19

Step 14 Step
å
Insert three LARGE WOOD DOWELS (6) into the
SHELF MOLDING (K).
å
Fasten the SHELF MOLDING (K) to the SLIDING SHELF (L).
Tighten four HIDDEN CAMS.
å
Then, fasten two WIDE EXTENSION SLIDES (32) to the SLIDING
SHELF (L). Use six BLACK 5/8" FLAT HEAD SCREWS (22) into
the exact holes shown in the enlarged upper view.
Open end
32
BLACK 5/8" FLAT HEAD SCREW
(6 used in this step)
428247
32
Use these holes.
22
www.sauder.com
Open end
L
K
6
(3 used)
1
Open end
32
Page 19