Sauder worksense MASON PEAK Serie Instrucciones De Montaje página 20

Step 14
å
With someone's help, carefully turn the LONG TOP (G) over, and hook the angled edges of the BRACES on the LONG TOP into
the angled edge of the LONG TOP MOLDING (V) and LEFT PEDESTAL BRACE.
å
Fasten the LONG TOP (G) to the END SUPPORT (X). Tighten two TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the WOOD DOWELS in the END SUPPORT insert into the END SUPPORT TOP MOLDING.
å
Remove the SMALL DRAWER (B) from your unit. Push in the black lever on each side of the drawer and pull the drawer
completely out. Refer to the diagram at the bottom of the page.
B
7
To remove the drawer, push the black lever in and
pull the EXTENSION SLIDE on the drawer from the
EXTENSION RAIL on the PEDESTAL.
Page 20
LEFT PEDESTAL
427803
7
Hook the TOP BRACES into
the LONG TOP MOLDING and
LEFT PEDESTAL BRACE.
G
X
W I S
u t T
i t h o
e w
f a c
E R S
S u r
T E N
F A S
www.sauder.com/commercial-office/service
2
V
2
K ®
O C
T - L