Publicidad
Idiomas disponibles
Idiomas disponibles
8. Install the Piping
IMPORTANT! The system will not work if the drain is not oriented correctly. Verify that the drain is level and aligned
with the pipes.
IMPORTANT! Allow the sealant to cure according to the manufacturer's instructions before using the bath.
Apply PVC primer and cement to the pipes.
Install the overflow pipe to the overflow ell, then install the perfect fill assembly to the overflow pipe.
Install the drain pipe to the perfect fill assembly, then install the drain pipe to the drain ell.
Connect the waste pipe to the perfect fill assembly.
NOTE: Refer to the "Complete the Installation" section for installation checkout.
Kohler Co.
15
1504928-2-A
Publicidad
