ROBBE Power Peak B7 EQ-BID Manual De Uso página 33

2. GENERaL DESCRIPtION
The Power Peak® B7 EQ-BID is an intelligent battery charger with convenient battery
management for charging and discharging NC, NiMH, lead-acid and lithium rechargeable
battery packs.
It also features an integral equalizer.
The Power Peak® B7 EQ-BID can be used to charge or discharge NC or NiMH battery
packs consisting of 1 to 16 cells in manual mode. When the battery is fully charged, the
process is terminated by the Delta-Peak method.
It is also possible to charge up to seven series-connected Lithium cells at a maximum
current of 10 Ampere. The process is terminated automatically according to pack voltage
when the battery is fully charged. Lead-acid batteries of 1 to 12 Volts can also be charged
automatically.
The charger features four internal battery memories which can be used
in manual mode to store battery-specific data for the charge and discharge
process of four different batteries.
The main feature of the Power Peak ® B7 EQ-BID is the revolutionary
Battery Identification System (BID). The range of different battery types is
constantly growing, and each type of battery requires its "own" charge pro-
cess. It is very easy to set up the charger incorrectly for a specific type of
battery, resulting in damage to the valuable pack.
charger. This function essentially means that PC software and computer technology are not
required in order to obtain an up-to-date overview of the battery status.
All manuals and user guides at all-guides.com
Operating Instructions
Power Peak ® B7 EQ-BID
The revolutionary robbe BID system offers a clever solution
to this problem: a small, lightweight BID chip is assigned
to each battery. It stores all the relevant data
for charging and discharging the battery correctly. When the
battery is to be charged or discharged, the BID chip attached to
the battery is connected to the Power Peak ® B7 EQ-BID, and
transfers the appropriate parameters to the charger.
All you need to do to start charging is press the
;'MODE' button. No tedious searching through
menus for the set-up parameters, maximum
protection from operator errors, and storage
of the relevant battery data on the BID chip /
key: those are the special advantages of the
BID system.
Since the essential data are stored in the BID
chip / key, they can easily be displayed on the
5