ROBBE Power Peak B7 EQ-BID Manual De Uso página 40

SEttING thE DISChaRGE CURRENt
CH. CURR
DC. CURR
cell count or battery voltage and the maximum discharge power. If the maximum discharge
power is exceeded, the charger's processor limits the maximum discharge current.
ENtERING thE BattERy CaPaCIty
BAT.CAP 3600mAh
Battery type
NiCd
NiMH
LiPo
LiIo
LiFe
Pb (lead-acid)
SEttING thE DELta-V CUt-Off POINt
BAT.CAP 3600mAh
DELTA.V 08mV/C
• Nickel-Cadmium battery (NiCd): 5 - 15 mV / cell (default: 8 mV / C)
• Nickel-Metal-Hydride battery (NiMH): 5 - 15 mV / cell (default: 8 mV / C)
SaVING thE SEttINGS
Press the 'EDIT / ENTER' button to save the settings you have selected. The screen then
reverts to the working display.
Operating Instructions
All manuals and user guides at all-guides.com
Power Peak ® B7 EQ-BID
The discharge current can be selected in 0.1 A
+1.00A
increments. The available range is 0.1 A to 10 A. The
-1.00A
maximum discharge current varies according to the
The battery capacity can be selected in 100 mAh
increments up to a maximum of 2000 mAh. After this
the increment rises to1 Ah, according to the
set capacity.
Battery capacity
100 - 60,000 mAh
100 - 60,000 mAh
100 - 60,000 mAh
100 - 60,000 mAh
100 - 60,000 mAh
100 - 60,000 mAh
For NC and NiMH batteries it is possible to adjust
the Delta-Peak sensitivity.
12
The stated range varies according to
the battery type: