Publicidad
Idiomas disponibles
Idiomas disponibles
US
2.1.7
Waist, Rear Attachment (Qty 1, if present)
The waist, rear attachment shall be used solely for travel restraint. The waist, rear attachment element shall not be used for fall
arrest. Under no circumstances is it acceptable to use the waist, rear attachment for purposes other than travel restraint. The
waist, rear attachment shall only be subjected to minimal loading through the waist of the user, and shall never be used to
support the full weight of the user.
2.1.8
Fall Arrest Attachment Element Extender (Qty. 1, if present)
Also called a D-Ring Extender. For fall arrest. Always attach other elements of a personal fall arrest system the free D-Ring at
the end of the extender. Do not attach anything to the harness back D-Ring.
WARNING!
An attachment element extender is not to be attached directly to an anchorage or anchorage connector for fall arrest. An
energy absorber must be used to limit maximum arrest forces to 1800 lbs (8kN) for ANSI Z359.11 or 1348 lbs (6kN) for NBR
15835:2010 and NBR 15836:2010. The length of the attachment element extender may affect free fall distances and free fall
clearance calculations.
Failure to follow this warning can result in serious personal injury or death.
2.1.9
Lanyard Parking Attachment (Qty 1 or 2, if present)
Allows snaphook of lanyard to be stowed when not in use.
2.2
Buckles and Adjusters
2.2.1
Qwik-Fit Buckle leg straps (Qty 2, if present)
Used for securing thigh straps around the user's thigh. The free end of strap must extend beyond the buckle and be tucked into
the keeper.
9
2 Description
Publicidad
