Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING: draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in
well ventilated premises only".
WARNING: draws the attention on
E)
compliance with the rules. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
WARNING: watch out for hot surfac-
F)
es.
CE Marking: indicates that the equipment is
G)
compliant with all relevant laws applicable to
the product.
WEEE symbol: indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
HAZARDS AND SAFETY PROVISIONS DURING TRANSPORT
During transport of the appliance, watch out for the following hazards and provide for the
countermeasures indicated below:
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due to
body overload
4
SAFETY AND INFORMATION SIGNS
Where or in which situations
does the hazard occur?
• When the appliance moves • Use a suitable lifting
E
D
F
37M3202
G
C
B
A
H
WARNING: dry operation is forbid-
L)
den.
HAZARD: do not insert hands in the
M)
appliance during operation.
Countermeasures
device
• Observe
the
values for lifting and
transport
• Wear personal protec-
tive equipment
SAFETY
L
37M3162
M
Safety device
None
limit
3378610_ut_GB
Publicidad
