• Operate the device at walking speed.
• The arrow
indicates the brush's rotational direc-
tion.
• Always test the device in an inconspicu-
ous area before using it on sensitive
fl oors.
Selecting the proper brush
For information on replacing the brush,
please refer to the "Assembly instructions"
section.
Steel brush (
Select this brush for removing persistent
lichenics and moss on robust grounds.
Use the steel brush on robust surfac-
es only (road, pavement) as it may
damage and/or scratch the ground.
Narrow nylon brush (
Select this brush for removing weed, li-
chenics and moss from small narrow joints.
Cleaning and
maintenance
Always unplug the device be-
fore working on it.
Any work that is not de-
scribed in these Instructions
must be carried out by a ser-
vicing agency authorized by
us. Danger of injury!
on the spray guard
11):
12):
Cleaning
Do not jet water onto the
trimmer and do not clean it
under fl owing water. This
would result in the danger
of an electric shock and the
trimmer could be damaged.
Always keep the device clean. Do
no use cleaning agents and sol-
vents.
• Clean the device, brush and splash
guard with a soft brush or cloth after
every use.
• Keep the louvres clean.
Maintenance
• Only use spare parts and accessories
that have been supplied or recommend-
ed by the manufacturer.
• Always inspect the equipment before it
is to be used. Do not operate the equip-
ment if safety devices, parts of the cut-
ting device or bolts are missing, worn
out or damaged.
• Always inspect the brush before start-
ing the device. Never use damaged
brushes. Replace any damaged or
worn brush.
Storage
• Store the appliance in a dry place well
out of reach of children.
• Do not expose the device for extended
periods to direct sunlight. This could
damage the device.
• Do not wrap plastic sacks around the
appliance as this could result in the for-
mation of moisture and mould.
GB
IE
27