Beurer MG 290 HD-3D Manual De Instrucciones página 12

Hand switch
2
5
7
10
11
14
16
6. Start-up
CAUTION
• IMPORTANT: Before using the device for the first time, ensure you have released all transport
locks on the massage mechanism. To do this, remove the screws using the tool provided on
the rear of the seat cover. If the transport lock screws are not removed first and the Shiatsu
seat cover is used immediately, the device will become irreparably damaged and unusable.
The warranty will not apply in this instance.
• Reuse the transport lock screws when transporting the device in the future. Transporting the device
without using the transport locks could cause irreparable damage to the device.
• Position the seat cover upright on a suitable seat with a sitting area and backrest (chair, sofa or
similar). Make sure that the seat has a sufficiently high backrest.
• Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.
• Connect the device to the mains by plugging the plug into the socket.
7. Operation
Gently press your back against the massage device to start with. Then make sure that you are in a comfort-
able position before gradually shifting your weight onto the massage device.The massage must be pleasant
and relaxing at all times. Stop the massage or change your position or the contact pressure if you find it is
painful or unpleasant.
• Do not force or jam any part of your body, in particular your fingers, between the moving massage elements
or their holders in the device.
• Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the massage heads
can move to the left and right of your spinal column.
• Switch on the massager with the
The LEDs signal the massage functions which are currently selected.
• The automatic switch-off function is activated with selection of the massage region and is preset to 15 min-
utes. You can set the automatic switch-off function to 5, 10 or 15 minutes by pressing the timer button.
Please note that changing the timer setting makes the timer start to count again from the beginning. To
avoid overheating the device, select the maximum massage duration at the beginning of the massage and
do not change it again during the massage.
3
4
6
8
9
12
13
15
17
1
button.
1 Button
2 timer button (5 – 10 – 15 minutes)
3 demo button
4 neck button
5 neck button (anti-clockwise rotation)
6 neck button (clockwise rotation)
7 3D shiatsu button (shiatsu massage)
8 rolling button (rolling massage)
9 spot buttons (localised massage)
10 Height adjustment button (localised massage)
11 full back button (entire back massage)
12 upper back button (upper back massage)
13 lower back button (lower back massage)
14 speed button (massage intensity)
15 heat button (heating)
16 vibration button (in-seat vibration massage)
17 heat button (in-seat heating)
12