■ After each use, whenever the appliance is unsupervised, prior to
assembly, prior to disassembly, prior to cleaning and in the event
of an error, the appliance must always be disconnected from
the mains.
W Risk of injury!
■ Before replacing accessories or additional parts which move
during operation, the appliance must be switched off and
disconnected from the power supply. After switching off, the
drive continues for a short time. Wait until the drive has come
to a standstill.
■ Do not adjust the swivel arm while the appliance is switched on.
■ Only use tools when the bowl is inserted, the lid is fitted and the
protective drive covers are in place! When using accessories, fit
the bowl, lid and drive covers according to the instructions!
■ While operating the appliance, never reach into the bowl or filling
shaft with your hands. Do not insert any objects (e.g. wooden
spoon) into the bowl or filling shaft. Keep hands, hair, clothing
and other utensils away from rotating parts.
■ Never use tools and accessories or 2 accessories at the same
time. When using the accessories, follow the individual operating
instructions enclosed.
■ The accessory must be completely assembled before use. Never
assemble the accessory on the base unit. The accessory should
only be used in the intended operating position.
■ Do not grip the sharp blades or edges of the cutting discs. Take
hold of cutting discs by the edge only.
■ Do not touch blender blades with bare hands.
■ Never reach into the attached blender! Never use the blender
without the lid in place.
■ Care shall be taken when handling the sharp cutting blades,
emptying the container and during cleaning.
W Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
W Risk of suffocation!
Do not allow children to play with packaging material.
W Caution!
We recommend that the appliance is never switched on for longer
than is necessary to process the ingredients. Do not operate
at noload.
Important safety information
en
23