Maintenance; Maintenance Chart - Efco PT 2700 Manual De Instrucciones

en
Please note that the following maintanance intervals apply for normal operating conditions only. If your
daily work requires longer than normal or harsh cutting conditions are present the suggested intervals
should be shortened accordingly.
Complete Machine
Controls (Ignition Switch, Choke Lever, Throttle Trigger,
Trigger Interlock)
Fuel Tank
Oil Tank
Fuel Filter
Chain Lubrication
Saw Chain
Guide Bar
Rim Sprocket
Clutch Drum
Chain Catcher
All Accessible Screws and Nuts (Not Adjusting Screws)
Air Filter
Cylinder Fins
Starter System Vents
Starter Rope
Carburetor
Spark Plug
22

MAINTENANCE

Maintenance Chart

Inspect (Leaks, Cracks, and Wear)
Clean
Check Operation
Inspect (Leaks, Cracks, and Wear)
Clean
Inspect (Leaks, Cracks, and Wear)
Clean
Inspect
Clean, Replace Filter Element
Check Output
Inspect (Damage, Sharpness, and Wear)
Check Tension
Sharpen (Check Gauge Depth)
Inspect (Damage and Wear)
Clean Bar groove and Oil Passages
Rotate
Lubricate Sprocket Nose
Deburr
Replace
Inspect (Damage and Wear)
Inspect (Damage and Wear)
Replace
Inspect (Damage and Wear)
Replace
Inspect
Retighten
Clean
Replace
Clean
Clean
Inspect (Damage and Wear)
Replace
Check Idle (Chain must not rotate at idle)
Check Electrode Gap
Replace
X X
X
X X
X X
X
X X
X
X
X X
X X
X X
X X
X
X
X
X
X
X
X X
X
X
X
X
X
X
X X
X
Every 6
X
Months
X X
X X
Replace with
every new chain
X
X X
X
Every 6
X
Months
X
Every 6
X
Months