SEVERIN WK 3342 Instrucciones De Uso página 9

be kept closed at all times.
 Th e kettle may only be operated with the
base provided with the appliance.
 Th e appliance must be used only on a heat-
resistant and level surface, impervious to
water stains.
 Do not allow the appliance or its power
cord to come into contact with open
fl ames or any hot surfaces such as hot-
plates.
 Do not let the power cord hang free, and
keep the cord well away from hot parts of
the housing.
 Always remove the plug from the wall
socket
- in case of any malfunction,
- aft er use, and also
- before cleaning the appliance.
 When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
 No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
 Th is appliance is intended for domestic or
similar applications, such as in
- staff kitchens,
commercial environments,
- agricultural areas,
- hotels, motels
establishments,
- bed-and-breakfast guest houses.
 In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer service
address can be found in the appendix to
this manual.
Th ermal safety cut-out
Th e preset thermal safety cut-out protects
the heating element from overheating should
the appliance be erroneously switched on
without any water, or if the heating element is
calcifi ed. Once the safety cut-out has switched
offi ces and other
etc. and similar
departments. Th e
off the kettle, it must be allowed to cool down
suffi ciently, or must be descaled before it is
switched on again.
Before using for the fi rst time
For reasons of hygiene, discard the fi rst three
fi lling of water.
Boiling water
– Remove the water container from its base.
– Push the release button to open the lid,
and fi ll the container with water to the de-
sired level, observing the Min. and Max.
markings.
– Close the lid and replace the container on
its base. Insert the plug into a suitable wall
socket.
Info: Once the appliance is connected to the
mains or the container is placed on its base,
the temperature selection buttons light up
briefl y in the sequence red-green.
– To turn the appliance on, use the
appropriate button, which will start
fl ashing red. During the heating period,
the temperature can be changed at any
time.
– Th e heating process begins.
– As soon as a certain temperature level has
been reached during the heating process,
the corresponding temperature selection
button shows a green light.
– Aft er reaching boiling point (or the
selected temperature),
switches off automatically. A triple beep
signal is heard and the corresponding
button shows a steady light.
– Around 30 seconds aft er the appliance
has switched off , the temperature button
indicator lights will also go out.
– To interrupt the heating process, the
appliance can be switched off by pressing
the appropriate temperature button again.
– To pour hot water, remove the container
from its base.
– To prevent hot steam from being emitted,
ensure that the lid remains closed while
pouring out the water.
Info: If the kettle is turned on again shortly
9
the appliance