Publicidad
Idiomas disponibles
Idiomas disponibles
5. Timer setting
1)Description of timer setting
There are up to 10 items for timer setting.
Each setting item has its date, power-on time, and shutdown time.
The max. duration of each setting item is 23 hours 50 minutes.
The setting date for each item can be any day or days of a week.
The date in each setting item represents the date of power-on time.
If the shutdown time of the setting falls on the second day, it is unnecessary to set the date
– you just set the shutdown time.
2)Steps to view the timer setting
Press the "TIMER SET" button.
Press the "+" or "-" to check the power-on time of the timer one by one.
For checking the shutdown time, press the "▲" button.
Press the "+" or "-" to continue viewing.
For deleting the current item of setting, press "C" to delete
3) Steps for timer setting
(I) Select the settings of the serial number
Press the "TIMER SET" button, and the serial number starts blinking.
Press the "+" or "-" to change the serial number until you get the serial number that you
need to set or modify.
(II) Select date
Press " TIMER SET" button once again, and the cursor on the left side of day starts
blinking.
Press the "▲" or "▼" keys to move the cursor to the corresponding day, press the "+" to
add the corresponding day, or press "-" to delete the day until you have completed the
selection of all dates.
(III) Set the start time
Continue to press the " TIMER SET" button, the hour starts blinking.
Press the "+" or "-" to adjust the hour.
Continue to press the " TIMER SET" button, the minute starts blinking.
Press the "+" or "-" to adjust minute.
(IV) Set the shutdown time
Then press the "TIMER SET" button, the display is off, and the hour starts blinking.
Press the "+" or "-" to adjust the hour.
Continue to press the " TIMER SET" button, the minute starts blinking.
Press the "+" or "-" to adjust minute.
(V) Set temperature
Then press the " TIMER SET" button, and the temperature set starts blinking. At this
moment, the temperature displayed is normally set temperature, which can be adjusted by
pressing "+" or "-"
(VI) Press " TIMER SET" button to continue setting, and press "OK" complete the setting.
6. Timer switch
"TIMER ON/OFF" is to control the timed opening and closing.
Restart the machine after power is cut off, the original setting is kept, but the current date
and time must be reset.
Note 1: When the week timer is power on, you should turn on the heating function, or else
when the machine is working again, there will be only the flame effect working.
NOTE 2: Repeat the same procedures to set more timing cycles if required after the 01-
timing cycle is finished.
5
Publicidad
