Publicidad
Idiomas disponibles
Idiomas disponibles
U
I
S
Junction line
A
Hook
B
C
2.5 Mounting the appliance on the bracket
After checking that the bracket is anchored to the wall and
that all necessary electrical connections and condensation
drain predispositions have been made, you can mount the
conditioner. Lift it by the sides of the bottom base until
the bracket fits on all of the right spots on the appliance.
In order to ease the operation, slightly tilt the appliance
towards you.
Direct electrical connections (disconnecting the power
Bracket
1
C
A
supply cable) and the anchoring of the condensation drain
must be carried out after having spaced the appliance
from the wall using a wooden wedge or any other similar
object.
Once the work is done, check that there are no openings
on the back of the appliance, especially where the air
ducts are connected.
2
1
Flap in vertical position
Bracket anchoring points
2
2
INSTALLATION
EN
B
37
Publicidad
