Publicidad
Idiomas disponibles
Idiomas disponibles
Wall Bracket Installation for Concrete
Walls
REQUIRED TOOLS (NOT INCLUDED)
1. Level
2. Pencil
3. Ø25/64" (10 mm) drill bit
MOUNTING THE WALL BRACKET
1. Loosen the bolt at the bottom of the main unit to take the wall
bracket off, using the T25 torx L-key.
2. Use a power line/ metal detector to verify the installation area
has no pipes or power lines beneath the surface. Hold the
wall bracket against the installation surface. Use a level to
ensure that the placement of the wall bracket is horizontal.
Use a pencil to mark the screw holes in the wall bracket onto
the surface.
4. Power drill
5. Power line/ metal detector
6. Philips screwdriver/bit
3. Drill the holes into the installation surface.
4. Insert the wall anchors into the holes.
5. Firmly mount the wall bracket using the provided screws.
6
Publicidad
