Descargar Imprimir esta página

FITFIU FITNESS BESP-250 Manual De Usuario página 35

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

PRODUCT USE
Display
SPECIFICATIONS:
TIME (TMR).............................................00:00 00 00-99:59 MIN
SPEED (SPD).............................................0.0 0.0-99.9KM/H
DISTANCE (DST)....................................0.00 -99.999.99KM
CALORIES (CAL).................................... 0-9999KCAL
PULSE (PULSE).................................... 40 40-240BPM (Optional)
Revolutions per minute (RPM) ............ 0-999 R/MIN
FUNCTION KEY:
MODE: This key allows you to select and lock the desired function.
OPERATION:
- The system turns on when any key is pressed or when it receives an input from the speed
sensor.
- The processor automatically shuts down when the speed sensor has no input signal or no key
is pressed for approximately 4 minutes.
1.
MODE: To choose SCAN or Lock if you do not want scan mode, press the MODE key when
the pointer over the To choose SCAN or Lock if you do not want scan mode, press the
MODE key when the pointer over the function you want starts to flash the function you
want starts to flash the function you want starts to flash.
2.
TIME: Press the MODE key once the pointer advances to TIME. The total working time
will be displayed.
3.
SPEED: Press the MODE key until the pointer advances to SPEED. Press the MODE key
until the pointer advances to SPEED. The total working time will be displayed.
4.
DISTANCE: Press the MODE key until the display advances to DISTANCE. The distance of
each workout will be displayed.
5.
PULSE: Press the MODE key until the pointer advances to PULSE. The user's current
heart rate will be displayed in beats per minute. Place palms of hands on both contact
pads and wait 30 seconds for the most accurate reading.
6.
CALORIES: Press the MODE key until the pointer advances to CALORIES. Calories burned
will be displayed.
7.
SCAN: Automatic display of the following functions in the order shown.
This monitor uses two "AAA" batteries. If the monitor does not display correctly, reinstall the battery
for best results.
35
EN - BESP-250

Publicidad

loading