Graco NAUTILUS 65 Manual Del Usuario página 72

Using Belt Positioning Clip
1. Make Sure Vehicle's Seat Shoulder
Belt Lays in the Red Zone As Shown
If the vehicle's seat shoulder belt lays
outside this zone, you MUST use the belt
positioning clip.
2. Attach Belt Positioning Clip
The shoulder belt positioning clip MUST
be attached to the slot on the bottom of the
base. Insert the loop end of strap through
the slot on bottom of seat exactly where
shown.
3. Push Clip and Strap Through Loop
Pass the clip and the strap through the loop
end as shown and pull strap up.
72