Publicidad
Idiomas disponibles
Idiomas disponibles
System connection
■ Preparation for use
CAUTION:
TO PREVENT ELECTRIC
SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
AC outlet
(AC 100 - 240V
~50/60 Hz)
■ HDMI ARC input (1)
●
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant TV to
your sound bar through a single HDMI connection.
To enjoy the ARC function, please ensure your TV
is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you can use your
TV remote control to adjust the volume output (VOL
+/- and MUTE) of the sound bar.
●
Connect the HDMI cable (not included) from unit's
HDMI (ARC) socket to the HDMI (ARC) socket on
your ARC compliant TV. Then press the
remote control to select HDMI ARC.
Note: Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to On.
■ OPTICAL input (2)
●
Remove the protective cap of the OPTICAL socket,
then connect an OPTICAL cable (not included) to the
TV's OPTICAL OUT socket and the OPTICAL socket
on the unit.
●
Press the
button on the remote control to switch to
the Optical input mode, the word "OPt"will be shown on
the display screen means to select the Optical mode.
Note:
The external device audio output must be set to PCM.
■ LINE IN input (3)
A.
Use a RCA to 3.5mm audio cable (not included) to
connect the TV's audio output sockets to the LINE IN
socket on the unit.
B.
Use a 3.5mm to 3.5mm audio cable (not included) to
connect the TV's or external audio device headphone
socket to the LINE IN socket on the unit.
●
Press the
button remote control to select LINE IN,
The word "LINE" will be shown on the display screen.
4
1
HDMI
Please ensure that the voltage marked on the rating label,
located on the rear panel, is the same as the voltage in
your area.
●
button
●
The Sound Bar Home Theater System has Bluetooth
capability and is able to receive a signal within a range
of 32 feet. To pair the Sound Bar Home Theater System
with a Bluetooth device:
1.
2.
3.
4.
5.
6.
7.
E-11
6
USB
■ Connect to power (4)
Insert the end of the power lead in to the AC IN socket
on the back of the unit.
Plug the other end of the cable in to the wall socket.
■ Bluetooth operation (5)
Press the source button
on the remote control button repeatedly to enter the
Bluetooth mode, the"no bt" message appears on the
display.
Activate your Bluetooth device and select the search
mode.
Select "HT-SBW192 SHARP" from the search list and
connect.
Enter "0000" for password if prompted.
When the devices are connected to each other, a
confirmation sound will be made. "bt" will show on the
display.
You can now playback music from your device.
Please note that the volume on the Bluetooth source
device operates independently to the volume of the
unit.
To turn off the Bluetooth function: disable the function
on your Bluetooth source device.
5
3
LINE OUT
2
OPTICAL
OUTPUT
on the unit, or button
Publicidad
