Working Display - Multiplex Power peak C8 EQ-BID 12V/230V 180W Instrucciones De Uso

Power Peak ® C8 EQ-BID 180W
typical voltage sensor lead is connected to the equalizer.
EQ adapter
Multiplex-PQ No. 308213
6.

WORKING DISPLAY

Battery memory
During a charge or discharge process this screen display provides all the necessary infor-
mation to keep the user informed of progress.
The top line shows the internal battery memory (e.g. 1 to 5), or "B", if a BID key is connec-
ted. Pressing the "EDIT" button takes you to the "EDIT DATA" menu (see Chapter 8 on
page 11) or "SETTINGS" (Chapter 9 on page 13). The internal memory can be selected
directly from the working display: press the "ENTER" button and use the arrow buttons to
select the memory you wish to use, then press the "ENTER" button again to confirm your
choice.
Lithium batteries).
It is also possible to alter the current while a charge or discharge process is under way.
arrow buttons. Finally press the "ENTER" button again to confirm the new value.
Operating Instructions
EQ adapter
Multiplex-PQ No. 308214
Momentary
Status
battery
display
voltage
Battery Charge /
type discharge
current
33 9
EQ adapter
Multiplex-PQ No. 308215
Elapsed
time
Capacity display
# 30 8124