Parameters In The Main Menu Without Bid - Multiplex Power peak C8 EQ-BID 12V/230V 180W Instrucciones De Uso

Power Peak ® C8 EQ-BID 180W
7.

PARAMETERS IN THE MAIN MENU WITHOUT BID

Wheel to display the following parameters.
INPUT VOLTAGE
DISPLAY OF THE LAST BATTERY CHARGE PROCESSES (M1 ... M5)
Select Wheel to view the desired memory. Pressing the "ENTER" button again cancels the
selection.
DISPLAY OF THE LAST BATTERY DISCHARGE PROCESSES (M1 ... M5)
the Select Wheel to view the desired memory. Pressing the "ENTER" button again cancels
the selection.
DISPLAY OF MAXIMUM BATTERY VOLTAGE
DISPLAY OF AVERAGE BATTERY VOLTAGE
DISPLAY OF CHARGED-IN OR DISCHARGED ENERGY
EQUALIZER DATA
If more than six Lithium cells are connected to the charger, the screen shows two alterna-
ting displays.
Note: the individual cell voltages are only displayed if a voltage sensor lead is connected.
Operating Instructions
Display of input voltage.
This function enables you to reconstruct the last five
battery charge processes; only the charged-in capa-
city is displayed. Press the "ENTER" button to select
This function enables you to reconstruct the last five
battery discharge processes; only the discharged
capacity is displayed. Press the "ENTER" button to
Maximum battery voltage during a charge or discharge
process.
Display of average battery voltage during a charge or
discharge process.
Display of the charged-in or discharged energy; the
value is shown in Wh (Watt/hour).
34 10
# 30 8124