Nikon COOLSHOT 40 Manual De Instrucciones página 13

3-3. Press the POWER ON/Measurement button once to start continuous measurement for approx. 8 seconds.
During measurement, the measured result is displayed consecutively while the laser irradiation mark is
blinking.
After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.
If you press the POWER ON/Measurement button during power-on, another 8-second continuous
measurement starts.
Example of measured distance
When measuring a flagstick at a golf course, for example, keep targeting the
flagstick at the center of the target mark to minimize handshake.
Example of measurement failure
display
En
Es
Fr
Pt
13