Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting
The PowerCans mount out-of-the-box to round bars
with the included 1.5", 1.75", and 2" diameter Bar
Clamps. Use the
sold separately, to mount your PowerCans to square
bars. Choose a structurally sound location to mount
the PowerCans. The Mounting Base may be rotated
±30° to accommodate some curved bars. Make sure
there are no items interfering with the route of the
wiring. Installation tools are not provided. 5mm and
6mm Allen Wrenches are required. Using mounting
hardware, including clamps and screws, not
provided by KICKER will result in a voided
warranty.
1. Screw the Mounting Bases to the PowerCans
using the Mounting Screws.
±30°
English
KPB Square Clamps
(47KPBSQ),
6mm Allen
Wrench required
9
Publicidad
