Dell Networking N1500 Series Back Panel; Power Supplies - Dell N1500 Serie Guía De Introducción

Dell Networking N1500 Series Back Panel

The following images show the back panels of the Dell Networking N1500
and N1500P Series switches.
Figure 1-4. N1500 Series Back Panel
Fan Vents
Figure 1-5. N1524P/N1548P Back Panel

Power Supplies

CAUTION:
Remove the power cable from the power supplies prior to removing
the power supply module itself. Power must not be connected prior to insertion in
the chassis.
NOTE:
The internal power supply unit and fans on the N1500 Series switches are
not removable.
Dell Networking N1524 and N1548
The N1524 switch has an internal 40-watt power supply. The N1548 has an
internal 100W power supply. For redundant power requirements, connect
a Dell Networking RPS720 (not included) to the RPS DC IN 14-pin connector
on the back of the switch.
Dell Networking N1524P and N1548P
Dell Networking N1524P and N1548P switches have an internal 600-watt
power supply feeding up to 17 powered devices at full PoE+ power (450W).
For additional PoE+ ports, connect a Dell Networking MPS1000 (not included)
to the MPS DC IN 16-pin connector on the back of the switch.
NOTE:
PoE power is dynamically allocated. Not all ports will require the full
PoE+ power.
AC Power Receptacle
Getting Started Guide
13