EINHELL FREELEXO 1200 LCD BT LCD Manual De Instrucciones Original página 40

Mowing time settings
•
Operating time
This provides you with information about the
current settings of the operating times of your
robot lawn mower
•
Mowing edges
For a tidy lawn edge, the "Edge mowing" set-
ting can be activated. The robot lawn mower
starts its mowing work every 7 work days by
first mowing once along the entire perimeter
wire. In addition, the robot lawn mower mows
on the way to the charging station at the end
of the daily mowing interval, if the charge le-
vel of the rechargeable battery is over 70%.
•
Fault memory
This provides you with information about the
most recent fault messages of your robot
lawn mower.
•
Mower statistics
This provides you with information about a
range of mower statistics.
Changing the PIN
You can change the PIN for the robot lawn mo-
wer and use your own personal PIN. To do so,
proceed as described in the chapter "Locking
mechanism / PIN". Important! Make a note of the
new PIN.
6.6 Control of the robot lawn mower
Starting procedure
1. Unlock the control panel (2).
2. Press the "START" button (52) fi rst.
3. Close the display cover (24).
The robot lawn mower will now operate in ac-
cordance with the mowing time setting. The batte-
ry charge level is monitored during the work time
and displayed on the LCD-display (50). Whenever
the battery charge level drops to 30%, the robot
lawn mower automatically returns to the charging
station (19).
Stopping mowing
1. To bring the robot lawn mower to an immedia-
te stop, press the STOP button (3).
2. Unlock the control panel (2).
3. Press the "HOME" button (53) to send the ro-
bot lawn mower along the perimeter wire (18)
and back to the charging station (19).
4. Close the display cover (24).
Anl_FREELEXO_LCD_BT_SPK9.indb 40 Anl_FREELEXO_LCD_BT_SPK9.indb 40
GB
6.7 Control of the robot lawn mower using
the app
All settings that you can make using the control
panel can also be made using the app. To do
so, fi rst download the Einhell app for robot lawn
mowers to your smart phone. The Einhell app is
available via the following link and QR code:
iOS: http://qr.einhell.com/12e103ce
Android: http://qr.einhell.com/176c0443
Use a Bluetooth connection to connect the robot
lawn mower with your smart phone and follow the
steps shown there.
Instructions concerning the Bluetooth con-
nection:
•
Use the Einhell app to establish a connection
to the robot lawn mower.
•
The range of a Bluetooth connection is limi-
ted. This means you must stay close to the
robot lawn mower to control it.
•
The robot lawn mower can be connected to
only one smartphone at a time.
•
Disconnect the Bluetooth connection once
you have made all the settings on the robot
lawn mower.
7. Cleaning, maintenance and
ordering spare parts
Hazard!
The equipment must be disconnected from the
power supply (pull out the power plug and switch
off the equipment by the main switch (7) (OFF)
(Fig. 8) prior to performing any cleaning and
maintenance work.
Caution! Wear work gloves!
- 40 -
12.10.2020 15:42:52 12.10.2020 15:42:52