Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
2. Replace battery cover on remote control transmitter.
Restore electrical power. Within 30 seconds of
powering fan, press and hold ON/OFF button (
on remote control transmitter for 5 seconds until fan
beeps once in order to synchronize remote with fan
motor. Use the remote control transmitter to test the
light and fan functions to confirm the learning process
is complete.
IMPORTANT: To prevent damage to remote control
transmitter, remove the battery if not used for long
periods. Store the remote control transmitter away
from excess heat or humidity.
NOTE: If fan and/or remote control fail(s) to operate or
you have purchased a new remote control transmitter,
make sure to turn the power off first.
3. Operation buttons on the front panel of the remote control
transmitter:
- Reverse function ─ fan must be set on low before
1
reversing blade direction
- Fan speeds: 1 (lowest) to 6 (highest) and
2
to turn fan ON
- OFF power button for fan
3
- Timer mode: fan may be set to run for
4
– 1 hour / 4 hours / 8 hours
- Dimmer mode: press and hold to dim light
5
- ON / OFF, power button for light
6
- Color mode: change/select light color
7
– soft white
– warm white
– cool white
– daylight
– cool daylight
- Breeze mode: fan automatically cycles between all
8
6 different speeds
- Vacation mode: light kit switches on for 5 minutes
9
every 2 hours
2
)
Remote Control Transmitter
3
5
Remote Control Transmitter
17
(back side)
1
2
3
6
8
4
7
9
Publicidad
