LOWES JENSON DN84MBK6LR Manual Del Usuario página 7

INITIAL INSTALLATION
2.
Determine mounting method to use.
A. Standard mount
B. Angle mount
IMPORTANT: If using the angle mount, ensure
the ceiling angle is not steeper than 15°.
NOTE: Closemount option is not available for
this fan.
*Helpful Hint: Downrod-style mounting is best
suited for ceilings 10 ft. high or higher. For taller
ceilings you may want to use a longer downrod
(not included). Angle-style mounting is best
suited for angled or vaulted ceilings. A longer
downrod is sometimes necessary to ensure
proper blade clearance.
Check to make sure blades (I) will be at least
3.
30 inches from any obstruction. Check
downrod (A) length to ensure blades (I) will
be at least 10 ft. above the floor.
4. Secure mounting bracket (B) to outlet box
(not included) using screws, spring washers
and flat washers provided with the outlet box.
*NOTE: It is very important you use the
proper hardware when installing the mounting
bracket (B) as this will support the fan.
IMPORTANT: If using the angle mount, make
sure open end of mounting bracket (B) is
installed facing the higher point of the ceiling,
and ensure the ceiling angle is not steeper
than 15°.
2
A
15° max.
B
3
STANDARD
4 4
MOUNT
B
7
A
30 in.
min.
I
10 ft.
min.
ANGLE
MOUNT
B
Open End