Pioneer GM-X564 Manual Del Usuario página 9

Connecting the Speaker Terminals
1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm and twist.
2. Attach lugs to speaker wire ends.
Lugs not supplied.
• Use pliers, etc., to crimp lugs to wires.
3. Connect the speaker wires to the
speaker terminals.
• Connect the speaker wires, passing them
through the terminal cover.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screw
Speaker
terminal
Speaker wire
Twist
10 mm
Lug
Speaker wire
Terminal cover
4. Push on the terminal cover.
8