AQUALUX 107248 Manual De Usuario E Instalacion página 36

VI. Installation instruction
1. Drawing for water pipes connection
(Notice：The drawing is just for demonstration, and layout of the pipes is only for reference.)
2. Connecting your power wire
(Note: please open the back panel for power connection. The operation is the same as above.)
① Please use cross screwdriver to take off
the 2 screws at the bottom of the right
side panel. Take off the lowerhalf of the panel.
② Unscrew the 3 screws on the cover of
the electrical box.
③ Connect the terminals according to
the electrical diagram
9
.