Descargar Imprimir esta página

AQUALUX 107248 Manual De Usuario E Instalacion página 43

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

IX.
Precautions
1. Attention
A.
Set proper temperature in order to get comfortable water temperature to avoid
overheating or overcooling;
B.
Please don't stack substances that can block air flow near inlet or outlet area,
or the efficiency of the heater will be reduced or even stopped;
C.
Please don't put hands into outlet of the swimming pool heater, and don't
remove the screen of the fan at any time;
D.
If there are abnormal conditions such as noise, smell, smoke and electrical
leakage, please switch off the machine immediately and contact the local dealer.
Don't try to repair it yourself;
E.
Don't use or stock combustible gas or liquid such as thinners, paint and fuel to
avoid fire;
F.
In order to optimize the heating effect, please install heat preservation
insulation on pipes between swimming pool and the heater. During running
period of the swimming pool heater, please use a recommended cover on the
swimming pool;
G.
Connecting pipes of the swimming pool and the heater should be ≤10m, or the
heating effect of the heater cannot be ensured;
H.
This series of machines can achieve high efficiency under air temperature of
+15℃~+25℃.
2. Safety
A.
Please keep the main power supply switch far away from the children;
B.
When a power cut happens during running, and later the power is restored, the
heater will start up automatically. So please switch off the power supply when
there is a power cut, and reset temp when power is restored;
C.
Please switch off the main power supply in lightning and storm weather to
prevent from machine damage that caused by lightning;
D.
If the machine is stopped for a long time, please cut off the power supply and
drain water clear of the machine by opening the tap of inlet pipe.
16

Publicidad

loading

Este manual también es adecuado para:

107249107250107844